Bomarc Economical series - Traverse Beam Robots for injection molding machine
BE□□□□ID/IS/WD/WSY
Model: 650/850/950
W : Telescopic stage
I : single stage
D: Product arm+runner arm
S : Single arm
Y: Traverse beam driven by AC servo motor
Main Specifications
Bomarc Economical series is applicable to all types of horizontal injection molding machines of 50-350T for product and runner take out .Ithas two types of arms , namely single stage and telescopic stage arm . R unner arm can be added when it’s three platen mold to take out product and runner at the same time .UsingBEseries robot can increase the productivity, reduce the defect rate , ensure safety of operators and accurately control the output to reduce waste .Dry cycle time is less than 8sec , using precision gearbox , the repetition precision for traverse axis is ± 0 . 1 mm .
Model | BE650 IDY/WDY | BE850 IDY/WDY | BE950 WDY |
Power supply capacity (KVA) | 1 | 1 | 1 |
Applicable molding machine (ton) | 50-160 | 160-300 | 250-350 |
Traverse stroke(mm) | 1300(1500) | 1300 (1500) | 1500 (1800) |
Crosswise stroke (mm) | P: 200 R: 100 | P: 300 R: 100 | P: 300 R: 100 |
Vertical stroke (mm) | 650 | 850 | 950 |
Max loading (Kg) | 3 | 3 | 3 |
Dry take out time (sec) | 2.3 | 2.6 | 2.9 |
Dry cycle time (sec) | 8 | 9 | 10 |
Air consumption (NI/cycle) | 12 | 14 | 14 |
Net weight (Kg) | 150-210 | 180-260 | 180-260 |




Optional function
Spraying device: Used for situations that demolding is not smooth.Spraying number of moulds and spraying time can be set.
Photoelectric inspection on finished products: The sensor can be installed at conveyor. Place finished product on the conveyor to avoid hitting among products.
Middle plate inspection:The position of the middle plate should be checked after mould opened end position to avoid runner arm from hitting middle-platen.
Air pressure scissors: Air pressure scissors can be installed for runner cutting.
Using high rigidity linear slide rail and aluminum alloy structural beam, telescopic special designed belt speed mechanism, can greatly shorten the structural height of vertical arm, in addition to increasing the speed and stability of the vertical arm, but also can cooperate with the low height of the plant.
The main structure of the robot, crosswise and vertical arm are using high rigidity linear slide rail and aluminum alloy structure beam. It can meet the requirements of fast speed, less vibration, long service life, and good parts interchangeability.
Auto pressure detection. Anti-falling cylinder can pop out to stop the falling of the robot arm when pressure is not enough.
Traverse axis is driven by AC servo motor, working with precision gearbox and belt driven, making robot fast speed, precise
positioning and the repetition positioning precision is ±0.1mm.
- Specifications
- Drawing
Bomarc Economical Series General Specifications
power supply | working pressure | Maximum allowable air pressure | Drive mode | Swivel |
1ΦAC220V±20V 50/60HZ |
5Kgf/cm 2 0.49Mpa |
8Kgf/cm 2 0.8Mpa |
Y: AC Servo Motor X, Z: Pneumatic Cylinder |
90° Fixed Pneumatic |
Item | Description | Feature |
Pendant controller | Display screen size | 3.5inch |
Color LCD screen | ◎ | |
Storage capacity | Fixed mode | 50 sets |
Teach mode | 50 sets | |
Max. steps of program | 100 | |
Operation mode & Program function | counter;Jump;Stack;Operation Condition | ◎ |
Dynamic position change(for adjust) | ◎ | |
I/O monitoring during Auto operation | ◎ | |
Timer modification allowed during Auto operation | ◎ | |
Record function | Operation record | ◎ |
Alarm record | ◎ | |
QC function | Record function | ◎ |
Alarm record | ◎ | |
User | Multiple users management | ◎ |
Spare 1/O port | Input /Output | 1/6 |
EOAT | Vacuum/Grip(Standard) | 1vacuum/1 grip 1 |
IMM interface | EUROMAP 12/67 | Option |
◎Standard |